THIS IS NOT A BID
THIS IS NOT AN OFFER - [example cabinet contract]
This is for your information (at least until we have working shop drawings with finished dimensions which can be signed off on).
Seller: Roland V. Wilson, II
Purchaser: J. Doe
Location: J. Doe’s Place
950 Main Street, Emeryville, CA 94608
Product:
Shop drawings. Exhibit A.
44 ln ft of cabinets and slab faces.
Faces: finish grade wood veneer/ ply core, wood veneer hot melt edge banding, sanded to 180 grit, doors drilled for euro hinge cup. Euro hinges and clips provided, doors not attached to cabinets (to be attached upon installation). Drawer fronts finish grade wood veneer/ ply core, wood veneer hot melt edge banding, sanded to 180 grit, drilled for drawer adjuster (Drawer attachment hardware), vertical dimensions fitted to installed drawer boxes, grain matching vertically each bay (and across adjacent bays, where possible, otherwise not matching (i.e., two adjacent bays added are wider than 4 feet)).
Grain direction at exposed surfaces is vertical where possible.
Tow kick and crown grain direction is horizontal.
Prefin maple ply interior, screwed and glued, prefin edge banding. .25 inch back with .5 nailer. 4-inch leg adjusters attached on lower cabinets. Uppers drilled with system holes for adjustable shelves as indicated in approved shop drawings (Exhibit A).
Finished ends: finish grade wood veneer/ ply core, wood veneer hot melt edge banding, shop maple or prefin maple interior and matching edge banding. Scribes on walls.
Drawers: .5 inch prefin, ply stock. Installed into cabinets with full extension drawer runners.
Paint grade on all faces directly facing and directly adjacent to dining room.
Cut sheets for Hood, Microwave, Sink, Oven, Range, Dishwasher, Refrigerator, Clothes Washer, Clothes Dryer, Water Heater provided by purchaser. Purchaser is responsible for information necessary to accommodate plumbing and electrical and gas and boxes for gas and electrical.
Wine wrack dimensions provided by purchaser. .5-inch finish grade wood veneer/ ply core, wood veneer hot melt edge banding. Door and lock on door provided.
Not included:
Installation, (Estimate at $25-50 per hour)
Conversion Varnish Finishing, (Estimate at $4.00 a sq ft)
Counter tops,
Delivery to job site, [usually included in price of the cabinets]
Any Hardware not listed above: (e.g,)
1. Pullout shelves
2. Garbage drawer pullout hardware
Grate in Dining room.
A desk.
Purchase Price:
Purchaser agrees to pay Seller $20,596 Dollars for the items set forth above in accordance with the following.
All faces are Quarter Sawn Fur Panel stock off the shelf at $62.95 per sheet (.75 x 4’ x 8’)
Based on a value of $20,596 = $5149 (25%) for all materials and $10,813 (52.5%) for Seller’s labor and expenses as Cabinetmaker [leaves (22.5%) profit].
Add $510 to purchase price for White Oak Panel (instead of Quarter Sawn Fur) stock off the shelf at $94.75 (.75x4’x8’)
Add/Subtract to purchase price $44 for each drawer or pullout shelf.
Contracted to complete from start date in 8 weeks as set forth above and in accordance with the following.
Regular Work hours:
24/7
I plan to work as much as possible on the weekend and on off hours. [ha ha]
Payment Terms and Schedule:
Payments shall be made according to the following schedule:
It is expressly understood and agreed that for the shop built work, progress payments shall be made per percentage of in-shop completion of work and value of materials purchased and delivered to cabinet shop.
Deposit: Paid $ 6,302.40
Progress Billing #1 Due upon completion of 13 prefin boxes $ 3,151.20
Progress Billing #2 Due upon completion of all cab.s and
all doors and drawers cut out
(but not edge banded) $ 3,151.20
Balance Due upon substantial completion $ 7,991.20
_____________
$ 20,596.00
Thanks,
Roland